Fix Eject Button Problem on Dell Studio 15
Just getting Dell Studio 15, it user then format the HD and start from scratch to make his Studio 15 has a clean start to life. Regardless of the fresh OS install, he’s got the eject button problem and no response from any of the capacitive buttons. He’s already try using FN+F10 key to perform an eject operation, but the capacitive buttons are not responsive. And then he did fresh OS install but it doesn’t solve anything, and the same problem still comes.
As the problem of eject button at Dell Studio 15 keeps happening despite a fresh install of Windows this because of not a software issue, it’s hardware. Presumably, the media panel or the ribbon cable that connects it to the motherboard not properly shielded.
The tricks to resolving Studio 15 with eject button problem you can use a piece of double-sided tape between the ribbon cable and the panel. You can also put a layer of foam tape on the underside of the media panel, under the buttons, and affixed a layer of aluminum foil to that. And then you need to run the media ribbon cable underneath all that. Through this trick you even didn’t reroute the cable at all, as there’s just a layer of foam and foil between the cable and touch panel buttons now.
Sometimes the problem of eject button at Dell Studio 15 can fix well by boot and shut down the laptop machine in about 5 times without discharging the capacitors via the power button.
